Drop an S2000 cluster into your 90s or early 2000s Honda build and the factory signals don't always translate correctly. The S2K Converter handles the interface between your vehicle and the S2000 cluster, with GPS and CAN Bus versions available depending on your ECU setup.
⚠ FOR OFF-ROAD / CLOSED COURSE USE ONLY. NOT LEGAL FOR USE ON PUBLIC ROADS.
Choose Your Version
Both versions control the S2000 cluster's fuel gauge and include built-in Wi-Fi configuration. The difference is how coolant temperature and vehicle data are obtained.
Universal
GPS Version
Designed for builds that aren't using a supported Hondata ECU. Vehicle speed is provided by the included GPS antenna, while coolant temperature is read from a dedicated coolant temperature sensor.
Works independently of the ECU
GPS antenna included
No CAN Bus connection required
Dedicated coolant temperature sensor required
Uses the vehicle's factory fuel level sender
Built-in Wi-Fi configuration
CHOOSE GPS Best for traditional swaps, older ECU setups, or any build that isn't using Hondata K-Pro V4 or S300 V3.
Hondata Integration
CAN Bus Version
Connects directly to a supported Hondata ECU over CAN Bus. Coolant temperature and vehicle speed are received directly from the ECU, eliminating the need for a separate coolant temperature sensor or GPS antenna.
Coolant temperature received over CAN Bus
Vehicle speed received over CAN Bus
No dedicated coolant sensor required
No GPS antenna required
Uses the vehicle's factory fuel level sender
Built-in Wi-Fi configuration
CURRENTLY SUPPORTED Hondata K-Pro V4 Hondata S300 V3
🌡️
Coolant Temperature
The GPS version uses a dedicated coolant temperature sensor. The CAN Bus version receives coolant temperature directly from the supported Hondata ECU.
⛽
Fuel Level
Both versions map your vehicle's fuel sender to the S2000 cluster's fuel gauge and can be calibrated through the built-in configuration interface.
🔀
Two Versions
Choose GPS for maximum compatibility or CAN Bus for direct integration with Hondata K-Pro V4 and S300 V3.
📱
Wi-Fi Config
Built-in access point. Connect from any phone or laptop, open 192.168.4.1, and configure live — no app, cables, or special software required.
🔧
K Tuned Upgrade Kit Available
Everything needed for K Tuned harness compatibility — pre-terminated wire with terminal, zip ties, and heat shrink. No extra parts to source.
